Xtraprime

Improves the adhesive capacity if Xtragrip® mirror adhesive on porous surfaces (also suitable for use with other silicone adhesives or MS polymers). Xtraprime is also recommended to prime surfaces subject to humidity. Xtraprime is thin, transparent and moisture resistant.

Instructions for use: Processing temperature +5°C to +25°C. The subsurface must be clean, dry and free of dust and grease. Generously apply Xtraprime undiluted with a brush. Allow Xtraprime to dry  thoroughly  (approx. 60 min. at +20°C / 65% relative humidity) before applying adhesive. To ensure that the subsurface is completely covered, a second coating of Xtraprime can be applied. After Xtraprime has been applied, protect the surface against moisture and dirt. Covers approx. 5 m²/litre, depending on condition of the subsurface.